TANKCURE COMPLETE FUEL TANK REPAIR KIT 600G

1 x RUST REMOVER 500 ml

1 X EPOXY REMOVER, 500 ml

1 x TANK CLEANER, 500 ml

1 x PETROL TANK SEALANT, 600g

Part Number : 833011/833012/833014/833013

The following information is about ALL available Tank Cure Products.

This listing is for the items listed above

For other Tank Cure products, please see my other listings

“TANK CURE” products enable you to recondition the inside of your fuel tank in a professional way. “TANK CURE” is manufactured by POLY-SERVICE. This petrol-resistant Tank Sealant is adopted on a large scale in The Netherlands. Germany, England and Belgium. Users have built up more then 15 years of very satisfying experience with this sealant. It has been successfully applied to steel tanks.

What can you achieve with Tank Cure?

Cure rusted tanks

Stop leakage through seams and pinholes

Preventive treatment against leaking seams. pinholes and the build up of rust

Shield off pollution in oil tanks (after sandblasting)

Treatment of the tank before application of Tank Sealant

In order to guarantee a good result, you always have to do some preparation on your tank. Before you apply the sealant, the tank should be absolutely dry. free of grease and almost free of rust. “TANK CURE” offers you products that will assist you in the preparation of the tank.

“TANK CURE” Tank Cleaner

“TANK CURE” Rust Remover

“TANK CURE” Epoxy Remover

These products form an ideal base before you apply the tank sealant.

This is a strong cleaning fluid to degrease your tank. Tank Cure advises to always use this product because it will guarantee good adhesion of the sealant to the surface of the petrol tank. Especially if you apply the sealant in a tank for a two-stroke engine, it is necessary to use the tank cleaner first.

Tanks with a rusted interior can be treated very successfully with this product. Tank Cure advises using the Rust Remover if the inside of your tank is severely rusted.

This product will remove all old layers of paint and/or sealants. Only use this product if you would like to apply a new sealant or if you plan to weld on your tank. You only need this product if you like to remove old layers of sealant or paint or if welding is needed on a tank that has sealant inside.

For a motorcycle tank, you will need 1/2 a litre of Tank Cleaner and 1/2 a litre of Rust Remover.

In order to guarantee a good result, you always have to do some preparation on your tank Before you apply the sealant, the tank should be absolutely dry. free of grease and almost free of rust. It is strongly recommended to use TANK CURE Cleaner and TANK CURE Rust Remover according to the user guidelines to guarantee a good result. These products are extensively tested in combination with the Tank Sealant.

“TANK CURE” tank sealant is based on a 2-component epoxy resin. After adding the two components together, stir them thoroughly for a couple of minutes. empty the can in your gasoline tank and seal the filler opening properly. Now slowly turn the tank in all directions. Keep turning for about 15 to 20 minutes. The sealant should touch all surfaces several times to form a good layer. Now open the filler cap and put the tank upside down to drain as much sealant as possible.

You will find several products on the market to treat gasoline tanks. Whatever product you are going to use: It is very important to apply sufficient sealant to cover the inside of your tank completely. Being unable to look inside the tank during the sealing process means you have to stay on the safe side. Experience shows that you will need approximately 450 grammes for a 15- to 20-litre petrol tank. “TANK CURE” supplies two standard packages of sealant. A 450-grammeme package for motorcycle tanks up to 20 litres and a 600-grammeme package for car tanks up to 60 litres.

For frequently asked questions about Tank Cure Products, please go to

https://www.tankcure.nl/Engels/faquk.html