£399.99
Out of stock
EBC X SERIES STAINLESS STEEL BRAKE DISCS & FA188HH EBC BRAKE PADS
Full floating discs for the front wheel inc EBC Brake Pads
The steel used for the new EBC brake discs is a special stainless steel compound with a higher friction effect than that of conventional heat-treated stainless steel brake discs. With the 10% improvement in the friction effect. the braking force is further increased.
The weight of the new series “X” and “XC” is reduced by a further 5-10% due to the 6-riveting system with a light-weight inner ring. which in turn means an improvement over conventional brake discs
The new brake discs are equipped with the unique and patented SD system from EBC. whose square rivets in the recesses of the brake disc. under the heat generated during braking. allow unrestricted expansion of the outer and inner rings without affecting the rivet connection
Such an impairment occurs when the brake disk is heated by strong braking and the outer ring contacts the (usually round) rivets that separate the outer ring from the inner ring. With the new EBC system. this problem is avoided. which causes 100% of the brake disc defects caused by warping of the disc and vibrations.
What is the SD system? This is the new four-cornered riveting system from EBC. This system completely prevents distortion of the brake disc. increases the life of the brake disc. and improves the braking performance.
Technical Data:
Outer Diameter: 320 mm
Inner Diameter: 61.2 mm
PCD: 81.2 mm
Number of mounting bolts: 5
Bolt hole diameter: 10.5 mm
Thickness: 5 mm
Offset: 13.5 mm
Type: Floating
Manufacturer: EBC
FA188HH EBC Sintered Brake Pads
The best metallic brake pad on the market for sport and fast motorcycles is EBC HH sintered high performance pads. Due to its long lasting and potent braking effect, within a year of their 2004 launch, these high performance brake pads established the benchmark by which all brake pads for street bikes were rated. EBC HH sintered brake pads are the wise choice for you and your bike because they are ideal for any situation you may encounter on the road or the track.
Key Features
* High friction rating for maximum stopping power
* Extremely long lifetime
* Super quiet in operation
* TUV and KBA tested and approved
* Supplied as one set per calliper
These American-made pads are a direct replacement for the sintered pads that came with your motorcycle when it was brand new. The sintered copper alloy offers superior braking and a longer lifespan. Where necessary, stainless steel radiator plates are attached to the pads to reduce heat transfer into the hydraulics of the bikes.
EBC HH pads are a fantastic option for any motorcycle rider seeking for a replacement or performance improvement since they offer fingertip stopping power in all weather conditions and an exceptionally long life.
