£262.99
2 in stock
Denali DialDimTM Lighting Controller for Universal Fitment
DialDimTM Lighting Controller
Allows your customers to sell a complete solution with easy control of all light functions
• Independently turn on or off and dim two sets of auxiliary lights from a single switch
• LED halo switch displays your exact settings
• Unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.
On/Off & Dim
Independently control two sets of lights on/off and intensity levels using the single DialDimTM switch. The blue halo controls light set one, and the green halo controls light set two. Double-click to switch between the two circuits.
High/Low Sync
Your auxiliary lights will automatically switch from your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle’s high beam circuit to enable this feature.
Stealth Mode
A clever 0% dim setting on the switch allows your lights to be “off” during normal driving conditions but will jump to 100% intensity with your vehicle’s high beam switch. In this mode, the lights will also react to turn signal and horn inputs but will remain off when no inputs are detected.
Cancel with Turn Signal
When enabled, the main lights (blue circuit 1) will cancel in sync with your signal to prevent “washing out” your factory turn signal. Simply connect the yellow and orange input wires to your vehicle’s turn signal circuit to enable this feature.
Flash as Turn Signal
When enabled, your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle’s turn signal circuit to enable this feature.
Strobe with Horn
When enabled, your auxiliary lights on both circuits will strobe at 4 Hz when you sound your horn. Simply connect the green input wire to your vehicle horn circuit to enable this feature.
Electronically Fused Circuits
Both light circuits are electronically fused and can be set right from the switch itself! The halo will illuminate red to notify you when a circuit fuse is tripped.
Voltage Display Indicator
Upon vehicle startup, the switch halo will flash green to indicate a healthy battery voltage or flash red to indicate a battery voltage that is below 11.8 volts.
Low Voltage Cutoff
If the battery voltage drops below 10.8 volts, the lights will not power on, preventing you from being stranded. The switch halo will flash four red LEDs to indicate a low voltage condition.
